When testing the tile press machine, it should be observed from the discharge machine or the discharge rack throughout the whole process, from the discharge to the sheet forming and cutting, whether the high-speed and low-speed sheet production time efficiency reaches the molding speed you expect. Then, after the shutdown, run the boot debugging operation on the control system by yourself. Detect whether there are invalid reaction instructions between operation and PLC control.
Hand pulling before cutting: each part is firmly connected, no obvious dislocation in installation, no rust on the tool wheel, sharp edge, no obvious jagged marks on the broken material, does not affect the normal feeding.
Feed guide: solid connection, smooth feed, convenient limit adjustment, level with the base surface of the lower roller or slightly lower than the lower roller surface.
Roller appearance: whether electroplating has no obvious color difference, color spots, knife marks, and rust is absolutely not allowed.
Roller wheel function: the overall roller movement is suitable (no obvious change in the gap during rotation), the shape is regular, no electroplating sharp burrs, no obvious bruises, deep groove wheel, no jarring knife marks.
After forming shear: solid welding, beautiful, smooth sliding part, good synchronization up and down; The blade is straight and the hardness should reach HRC58-62 degrees. The whole cutter should be perpendicular to the center line of the roller wheel.
Control system: easy to operate, control cabinet appearance beautiful, ergonomic. The execution of the operation is quick, the cutting length is accurate (the components should be internationally renowned brands)
Plate type inspection: flat surface, no obvious indentation, no obvious bag wave, no crow’s feet, no scraping, no obvious color difference, no wave edge, 6 meters long small head ≤±3, width error range ±5, height error ≤±1, length error ≤2, diagonal error ≤2.
- Phone: +8615038013015
- Email: elena@howann.net
Menu