Floor bearing equipment is often used in the design of steel structures with high-rise buildings. In high-rise buildings with high earthquake intensity or high earthquake frequency, the core tube and outer frame forms that are not conducive to earthquake resistance should not be simply selected for the sake of economy. The surrounding giant columns should be selected, and the core should be used as a supporting frame structure. Not conducive to earthquake resistance. In light steel industrial buildings, when there is a large suspension load or moving load, you can consider using portal rigid frame instead of portal rigid frame. In areas with high basic snow pressure, the roof curve should favor snow accumulation.The bearing plate of the building has simple shape, large wave degree and high strength. The installation is first laid with welded steel mesh, and then combined with concrete observation and watering, and the bond is good. In high-rise buildings, steel formwork can be omitted to reduce floor load.
1.in the use stage, improve the overall stability of the steel beam and the local stability of the upper flange;
2.When installing the floor steel bearing plate, it can be used as a construction platform. At the same time, because there is no need for temporary support, it will not affect the work of the next layer of construction plane.
3.the floor steel bearing plate can accommodate water, electricity and pipelines, thereby integrating the structural layer and pipeline, indirectly increasing the height of the floor or reducing the height of the building, bringing flexibility to the architectural design;
4.according to the different cross-section shapes of the floor steel bearing plate, the amount of floor concrete can be reduced by more than 30%, and the reduced floor weight can correspondingly reduce the size of the trabecula, column and foundation, thereby improving the overall performance of the structure;
5.The steel plate produced by the floor bearing equipment can be used as a permanent formwork of cast-in-place concrete. In this way, the procedure of installing and removing the formwork during construction is saved, thus saving time and manpower.
6.in the construction phase, the floor steel bearing plate can be used as a continuous transverse support of the steel beam to improve the overall stable bearing capacity of the steel beam.
7.the floor steel bearing plate can be used as the bottom bar of the floor, reducing the workload of the installation of the bar.
600 floor bearing plate machine is made of cold rolled galvanized steel plate with cross section of V shape, U shape, trapezoid or similar waveform. It is mainly used as a permanent steel frame, but can also be used for other purposes.
610 floor plate bearing machine is mainly composed of feeding machine, feeding guide platform, forming host machine, stamping device, forming cutting device, hydraulic station, computer control cabinet and other parts. Equipped with manual uncoiling machine, forming machine, hydraulic cutting machine, electronic control system, hydraulic system, discharge rack, equipped with the pressure of the bearing plate on the floor.
The steel bearing floor produced by 914 floor bearing equipment is widely used in power plants, power equipment companies, automobile showrooms, steel structure workshops, cement warehouses, steel structure offices, airport terminals, gymnasiums, large supermarkets and music venues. Hall, grand theater, railway station, logistics center, Olympic stadium and other steel structure building facilities.
